MTS Insight 5 Material Testing System
This is an electromechanical material testing system can be employed in a wide variety of tests, including tensile, compression, flex, and peel-tear studies for: biomedical and biomechanical testing, general purpose component fatigue testing, plastics testing, composites testing, elastomer testing, wood and paper testing as well as advanced material characterizations.
Learn More
MTS 858 Material Testing System
System can be employed in a wide variety of tests, including tension, compression, bend, and fatigue studies for: biomedical and biomechanical testing, soil and asphalt testing, general purpose component fatigue testing, plastics testing, composites testing, elastomer testing, wood and paper testing as well as advanced material characterizations.
Learn More
MTS 370 Landmark Material Testing System
System can be employed in a wide variety of tests, including tension, compression, bend, and fatigue studies for: biomedical and biomechanical testing, soil and asphalt testing, general purpose component fatigue testing, plastics testing, composites testing, elastomer testing, wood and paper testing as well as advanced material characterizations.
Proto Manufacturing LXRD Laboratory Non-Destructive Residual Stress Measurement System
The LXRD features a unique Modular Goniometer System (patent pending) that offers the operator flexibility. The LXRD demonstrates measurement speed unsurpassed by any other residual stress analysis system. Measurements can be performed in as little as few seconds, and after initial setup, can generate compelling data.
Physical Acoustic Corporations Ultrasonic Immersion System
This system is a heavy duty industrial immersion and gantry system used for ultrasonic inspection. It is capable of pulse-echo and/or through transmission modes to detect the location, orientation, and size of material voids and abnormalities in a variety of structures, materials, and surfaces. Its closed-loop controls and high torque, low noise micro-stepping motors allows for precise control of the sensors as well as the inspected specimen.
Physical Acoustic Corporation Pocket UT Portable Ultrasonic System
Battery operated, hand held, stand-alone data acquisition system with full A, B, & C-scan capabilities. It quickly assesses the presence, depth, shape, and orientation of cracks, flaws, corrosion/erosion, delaminations, and internal anomalies in a variety of structures, materials, and surfaces. This unit can operate as a conventional thickness meter, a basic flaw detector (with RF display and alarm gates) or in either active B-scan or full C-scan data acquisition, display, and analysis. It can be integrated with virtually any available single or dual-axis scanner (with standard interfaces) manual or automated with conventional or dry-coupled UT transducers.
Wilson Instruments Series 2000 Rockwell Hardness Tester
System can be used to test macro-scale hardness of various specimens. This unit utilizes motor/encoder control and a load cell or force transducer to apply and regulate the test force. The electronic closed-loop control system can monitor and adjust the applied force up to 500 times per second which increases tester accuracy and eliminates force errors. This system is simple to use and eliminates the levers, leadscrews, and deadweights of open-loop type systems.
Vision Research Phantom v5.1 High Speed Camera
This camera allows for slow-motion playback and scientific analysis of transient phenomena which occur too fast for normal video equipment to capture. It can be used in lab environments or out in field/industrial settings. The camera software allows the footage to be saved as a raw cine for later analysis or conversion to various video and image formats.
Olympus IPLEX FX Industrial Videoscope
This videoscope allows for remote visual inspection of parts and areas that are not readily accessible to direct human interaction. The videoscope is equipped with several optical adaptors allowing for a clear crisp image at any direction of view, angle of view, or depth of field. This unit has the ability to measure the distance between two points, the length of plotted lines, the area of plotted regions, and the depth of a point of interest.
Keyence VK-9700 Color 3D Laser Scanning Microscope
This laser microscope provides an easy way to perform ultra-precision advanced analysis by combining the convenience of an optical microscope with the analysis functions of a SEM and a roughness gauge. This system can be used for imaging purposes or as a 3D non-contact measurement device with 1 nm resolution.
Keyence VHX-600 Digital Microscope
This digital microscope can be used for observation, recording and measurement. It combines the convenience of an optical microscope with the benefits of a digital imaging system. This system allows the user to produce a clear, sharp image at varying depths of field as well as image stabilization for less than perfect observation conditions.
NSI X-View M5000-CT Computed Tomography System
This system is a turnkey X-ray Inspection and Computed Tomography system designed specifically for industrial applications. This system utilizes an NSI radiation shielded enclosure and NSI M5000 seven-axis component manipulator, an NSI X-View IW image processing workstation with high resolution flat panel detector with 225 kV microfocus X-ray system. This system is state-of-the-art in high resolution digital X-ray imaging technology.
Olympus i-SPEED 3 High Speed Camera
This camera allows for slow-motion playback and scientific analysis of transient phenomena which occur too fast for normal video equipment to capture. It can be used in lab environments or out in field/industrial settings. The camera software allows the footage to be saved as a raw cine for later analysis or conversion to various video and image formats.
Olympus OmniScan MX
This system includes the phased array and eddy current array modules which can be used for surface and subsurface flaw detection and characterization in materials. This unit offers a high acquisition rate and powerful software to efficiently perform manual and automated inspections.
Thermo Scientific Niton XL3t XRF Analyzer with GOLDD Technology
This system can be used for analysis of metal alloys for PMI, scrap metal recycling, toy and consumer goods screening, RoHS compliance, QA/QC in the manufacturing environment, analysis of soils and sediments, environmental monitoring, and geochemical mapping.
UniWest US-454A Multi-Frequency Eddy Current Instrument
This system can be used for detection of surface and near surface defects in conductive materials. It can also be used to: verify material properties including hardness, case depth and pattern, and retained austenite: identify material mix and correct alloy; and confirm as-forged or as-cast conditions prior to heat treatment.